SA Parts Store
×

Need installation?? We can do it.
Contact us BEFORE you buy for a better deal on parts and installation! 1.954.477.0443 or Live Chat

Have Questions? Call or Text Us!

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Performance, Style

  • Wordwide Delivery

    Express shipping on all orders

2023-Up BMW G87 M2

FLIP-1316-BKCF
Front Splitter
$599.98
Product Overview Upgrade the aggressive front-end presence and aerodynamic performance of your 2023–Present BMW M2 with...
$599.98

customers are viewing this product
2023-Up BMW G87 M2
Product Overview

Upgrade the aggressive front-end presence and aerodynamic performance of your 2023–Present BMW M2 with the EOS TR Style 3-Piece Dry Carbon Fiber Front Bumper Splitter Lip. Designed specifically for the G87 M2 platform, this performance-focused front lip splitter enhances the lower valance profile while maintaining OEM-level fitment and seamless factory integration.

Engineered for precision, the TR Style splitter features a three-piece modular configuration consisting of a center blade and two side extensions. Once installed, the components align precisely to create a unified and continuous aero surface that complements the G87’s wide, squared-off front bumper geometry. The result is a more aggressive stance, improved visual width, and motorsport-inspired detailing without compromising factory design language.

Each section is constructed from genuine dry prepreg 3K 2x2 twill weave carbon fiber and autoclave-cured under high pressure and controlled temperature conditions. This advanced manufacturing process produces a lighter, stronger, and more structurally consistent carbon component compared to traditional wet-lay carbon fiber. The higher fiber density and reduced resin content ensure superior rigidity, enhanced strength-to-weight ratio, and long-term dimensional stability — ideal for both street and performance driving applications.

The exterior surface is finished with a high-gloss UV-resistant clear coat that protects against fading, yellowing, oxidation, and environmental exposure. This protective layer preserves the deep carbon weave clarity and reflective finish, delivering OEM+ aesthetics with long-term durability.

Designed as a direct bolt-on upgrade, the splitter reuses OEM existing mounting locations and factory hardware. No cutting, drilling, or permanent modification is required, allowing enthusiasts to enhance front-end aerodynamics while preserving factory bumper integrity.

Short Compatibility:
FITMENT Fits ALL 2023–Present BMW G87 M2 Models


Key Features

Engineered for 2023–Present BMW G87 M2
Specifically designed for the G87 chassis to ensure precise contour matching and factory-level integration with the OEM front bumper.

TR Style 3-Piece Modular Splitter Design
Includes one center section and two side extensions that form a seamless and continuous lower aero profile once installed.

Dry Prepreg 3K 2x2 Twill Weave Carbon Fiber Construction
Autoclave-cured under high pressure for superior fiber density, structural rigidity, and lightweight performance.

Enhanced Strength-to-Weight Ratio
Delivers exceptional durability without adding unnecessary front-end weight, maintaining factory handling balance.

High-Gloss UV-Resistant Clear Coat Finish
Protects against fading, yellowing, oxidation, and environmental wear while showcasing deep carbon fiber weave clarity.

Aerodynamic Lower Valance Extension
Extends the front bumper profile to improve airflow management and increase high-speed front-end stability.

OEM Mounting Location Compatibility
Designed to reuse factory existing holes and mounting points for accurate alignment and secure attachment.

Direct Bolt-On Installation
No cutting, drilling, trimming, or permanent modification required.

Motorsport-Inspired Styling
Adds aggressive front-end definition while preserving OEM design intent.

Ideal for Street and Track Builds
Suitable for daily driving, performance builds, and show-quality carbon fiber aero packages.


Installation

Installation manual is NOT included.

This splitter is designed to reuse OEM existing holes and factory hardware for installation. No cutting, drilling, or permanent modification is required.

Hardware is included for direct bolt-on installation.

While installation is straightforward, professional installation is highly recommended to ensure correct alignment, even panel gaps, and proper torque application across mounting points.


Vehicle Compatibility

FITMENT Fits ALL 2023–Present BMW G87 M2 Models

Year Make Model Trim
2026 BMW M2 Base Coupe 2-Door
2026 BMW M2 Coupe Coupe 2-Door
2025 BMW M2 Base Coupe 2-Door
2025 BMW M2 Coupe Coupe 2-Door
2025 BMW M2 Edicion 30 Anos Coupe 2-Door
2024 BMW M2 Base Coupe 2-Door
2024 BMW M2 Coupe Coupe 2-Door
2023 BMW M2 Base Coupe 2-Door
2023 BMW M2 Coupe Coupe 2-Door
 

About Dry Carbon

Dry Carbon Fiber vs Wet Carbon Fiber — What’s the Difference?

Not all carbon fiber parts are made the same. The biggest distinction comes down to how the carbon is processed — commonly known as dry carbon and wet carbon. Both use genuine carbon fiber weave, but the production method, finish, and performance are completely different.

Manufacturing Process                                  

Dry carbon fiber parts are produced using a pre-preg (pre-impregnated) carbon cloth, where the exact amount of resin is pre-applied by the manufacturer. These sheets are then vacuum-sealed and cured under high pressure and temperature in an autoclave, removing excess air and resin.
The result is a light, extremely strong, and precisely formed component — the same process used in motorsport and aerospace applications.

Wet carbon fiber, on the other hand, uses a hand-lay or wet-lay method. The carbon cloth is laid into a mold and liquid resin is manually brushed or poured over it before curing. Because it’s not vacuum-bagged or autoclave-cured, there’s usually more trapped resin and air pockets, leading to a heavier part and a less uniform finish.

Weight & Strength

Dry carbon fiber is roughly 30–50% lighter than wet carbon. This is due to the controlled resin ratio — just enough to bind the fibers without unnecessary weight.
By comparison, wet carbon or carbon-over-fiberglass parts can be up to 70% heavier, since excess resin and fiberglass layers add mass without increasing stiffness.
For reference:

  • Carbon Fiber Density: ~1.55 g/cm³
  • Fiberglass Density: ~2.6 g/cm³

Dry carbon also offers a much higher modulus of elasticity (~125 GPa), giving it outstanding rigidity under stress — ideal for aerodynamic and high-load components.

Visual & Structural Differences

  • Backside: A true dry carbon piece will look identical front and back — you can see the same woven pattern throughout.
    Wet carbon or fiberglass-backed parts often have a dull, uneven underside with visible fiberglass texture or color variation.
  • Edges: Solid dry carbon has clean, uniform black edges.
    Wet carbon or overlay parts may show a white or grey line along the edge, revealing the fiberglass underneath — sometimes hidden with black paint trim.
  • Finish: Dry carbon typically has a consistent matte or satin finish, while wet carbon can appear glossy but uneven due to hand-applied resin.

 

 

 

 

 


Read More
Read Less

All products are shipped out from one of the Signature Autohaus shipping locations. Signature Autohaus drop ships some products and ships direct others. All products are shipped via FedEx, UPS, DHL or another qualified shipping carrier. Special arrangements may need to be made for international orders and oversize packages. In the event a product arrives damaged to your location, please follow the steps listed below. All damaged items must be reported to the shipping carrier immediately and you must notify Signature Autohaus within 5 days of receiving your order. If these steps are not followed, your shipment may not be able to be a candidate for a claim. Complete the Shipping DAMAGE Claim Form by contacting the carrier that delivered your package. 1) Keep the product and its original packaging and box Make a list of the damaged or lost item(s) 2) Signature Autohaus will contact the shipper once we receive the email info above to schedule a pickup, DO NOT send it back to us 3) Once the product is picked up and inspected by Signature Autohaus and or Supplier, a replacement or credit will be issued. 4) The Shipping Rates shown at time of checkout our dimensional rate only. If your shipment weight is to much then contact us for a shipping quote. If there is an error in the shipping rate quoted we will contact you and let you know of the changes. International orders(Outside the USA) are not automatically processed as we may require additional information from you. If a product is ordered and not wanted, the UNUSED item can be returned for a 35% restocking fee. Shipping is not refundable in either direction. All items wanting to be return MUST be reported within 30 days of the original invoice date. No items will be returnable after 30 days. All products shipped from the Signature Autohaus warehouse are shipped via FedEx or Freight and require a signature when delivered. Some packages shipped from the manufacturer may or may not require signatures for package release. Fedex, UPS, and DHL have package pick up locations if you are unable to sign for the package. If the package is returned to Signature Autohaus or manufacturer, you will be responsible for the return shipping costs and pay a 35% restocking fee. These fees will be charged to your account on file. SIGNATURE AUTOHAUS DOES NOT REFUND SHIPPING CHARGES. If you modify, install, or alter the item in any form, we cannot accept it as a return, will not cover any expenses related to the product or installation, and you maybe be required to purchase a replacement. In the event that the product you ordered is sent either incorrectly or processed wrong by Signature Autohaus, we will arrange for the package to come back to us and ship out a replacement. We will evaluate the situation before we determine the shipment was incorrect. To return a item back to us, please do the following: 1. Contact our Customer Service Department to receive a RMA number. All packages returned without a Returned Merchandise Authorization number will be refused. 2. Package the item up in original packaging unless deemed unuseable 3. Include the UNUSED parts and any additional information that was included 4. Include a copy of your receipt 5. Write a brief description of the problem with the product 6. If you have a receipt for the return shipping include as well 7. We DO NOT accept any freight collect packages 8. Once we have received the above information we will notify you via email or phone and let you know the status.

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×