Engineered exclusively for the 2023–2027 Chevrolet Corvette C8 Z06, the AeroFlowDynamics F1 Exhaust System transforms the LT6 flat-plane crank V8 into a true Formula-inspired masterpiece.
This is not just an exhaust. This is the closest you will get to an F1 scream on the street.
Designed to extract maximum pitch, maximum volume, and maximum emotion from the 5.5L naturally aspirated LT6, our system delivers razor-sharp high frequencies at wide open throttle while maintaining refined drivability when valves are closed.
🔥 F1-Inspired Sound Profile
• Valves Closed – Controlled tone with minimal drone • Valves Open – Ultra high-pitch exotic scream with aggressive turbo spool • Track Section Downpipes – Opens up the system providing maximum volume and race-level aggression
The result is an unmistakable exotic sound that rivals the signature tone of European hypercars.
Downpipe Options
OEM Downpipes
Retain your factory Z06 downpipes and catalytic converters for the most street-friendly RS configuration.
AFD 200-Cell High-Flow Downpipes
The AFD 200-cell high-flow downpipes reduce restriction while retaining catalytic converters for emissions/inspections.
Please refer to your vehicle warranty for emission component related statements as the 200-cell high-flow downpipes void specific warranty agreements, as well as state/regional regulations.
AFD Track Section
The AFD Track Section provides the highest-flow and most aggressive configuration available.
This track section downpipe selection is designed for "Off-Road" use ONLY. Please review our terms and conditions under the disclaimer policy for further information.
Additionally, please refer to local emissions and exhaust regulations as these downpipes are expected to cause an emissions-related check engine light due to the removal of the OEM downpipes housing emission components.
Material Options
• Stainless Steel – Approximately 20% lighter than OEM • Grade 5 Titanium – Approximately 50% lighter than OEM
Our stainless version uses thinner internal tubing to produce a sharper, higher-frequency tone compared to traditional stainless systems.
Production Lead Time
This AeroFlow Dynamics exhaust system is built to order to ensure the highest level of craftsmanship, quality, and fitment. ( UNLESS IN STOCK) Production begins immediately after your order is placed. For concerns about lead times and exhaust systems policies, please review our Terms and Conditions.
Precision Engineering
Designed specifically around the underbody layout, mounting points, bumper clearance, and diffuser geometry of the C8 Z06.
• Mandrel-bent tubing • TIG-welded construction • Direct bolt-on fitment
No cutting. No fabrication. Direct installation.
📦 What’s Included
AFD F1 Catback Exhaust Assembly
Optional Track Section (if selected)
O2 Sensor Simulators
Wiring harness extensions
Required mounting hardware
Vehicle-specific brackets and connections
Installation support
Factory valve actuators must be transferred from your OEM exhaust.
💎 Why Choose AFD F1 for Your C8 Z06?
The C8 Z06 already revs to 8,600 RPM. It deserves an exhaust that matches its character.
Our F1 system is engineered to amplify the flat-plane crank harmonics, creating an exotic high-frequency tone rarely achieved on American platforms.
All products are shipped out from one of the Signature Autohaus shipping locations. Signature Autohaus drop ships some products and ships direct others. All products are shipped via FedEx, UPS, DHL or another qualified shipping carrier.
Special arrangements may need to be made for international orders and oversize packages.
In the event a product arrives damaged to your location, please follow the steps listed below. All damaged items must be reported to the shipping carrier immediately and you must notify Signature Autohaus within 5 days of receiving your order. If these steps are not followed, your shipment may not be able to be a candidate for a claim.
Complete the Shipping DAMAGE Claim Form by contacting the carrier that delivered your package.
1) Keep the product and its original packaging and box
Make a list of the damaged or lost item(s)
2) Signature Autohaus will contact the shipper once we receive the email info above to schedule a pickup, DO NOT send it back to us
3) Once the product is picked up and inspected by Signature Autohaus and or Supplier, a replacement or credit will be issued.
4) The Shipping Rates shown at time of checkout our dimensional rate only. If your shipment weight is to much then contact us for a shipping quote. If there is an error in the shipping rate quoted we will contact you and let you know of the changes. International orders(Outside the USA) are not automatically processed as we may require additional information from you.
If a product is ordered and not wanted, the UNUSED item can be returned for a 35% restocking fee. Shipping is not refundable in either direction. All items wanting to be return MUST be reported within 30 days of the original invoice date. No items will be returnable after 30 days. All products shipped from the Signature Autohaus warehouse are shipped via FedEx or Freight and require a signature when delivered. Some packages shipped from the manufacturer may or may not require signatures for package release. Fedex, UPS, and DHL have package pick up locations if you are unable to sign for the package. If the package is returned to Signature Autohaus or manufacturer, you will be responsible for the return shipping costs and pay a 35% restocking fee. These fees will be charged to your account on file.
SIGNATURE AUTOHAUS DOES NOT REFUND SHIPPING CHARGES. If you modify, install, or alter the item in any form, we cannot accept it as a return, will not cover any expenses related to the product or installation, and you maybe be required to purchase a replacement.
In the event that the product you ordered is sent either incorrectly or processed wrong by Signature Autohaus, we will arrange for the package to come back to us and ship out a replacement. We will evaluate the situation before we determine the shipment was incorrect.
To return a item back to us, please do the following:
1. Contact our Customer Service Department to receive a RMA number. All packages returned without a Returned Merchandise Authorization number will be refused.
2. Package the item up in original packaging unless deemed unuseable
3. Include the UNUSED parts and any additional information that was included
4. Include a copy of your receipt
5. Write a brief description of the problem with the product
6. If you have a receipt for the return shipping include as well
7. We DO NOT accept any freight collect packages
8. Once we have received the above information we will notify you via email or phone and let you know the status.
We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies.
privacy policy
Ask The Signature Experts anything. We can help and advise you from mild to wild! Complete this form and we will follow up with you typically within 24 hours.
