SA Parts Store
×
-22%

Need installation?? We can do it.
Contact us BEFORE you buy for a better deal on parts and installation! 1.954.477.0443 or Live Chat

Have Questions? Call or Text Us!

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Performance, Style

  • Wordwide Delivery

    Express shipping on all orders

Jack Pads Adapter with Storage Bag for Tesla Model 3/Y/S/X

TSL0240
wheel accessories
$35.99 $27.99
4-piece lift-point adapter kit Protect the designated lift points before the car leaves the ground. Tesla...
$27.99

customers are viewing this product

4-piece lift-point adapter kit

Protect the designated lift points before the car leaves the ground.

Tesla provides designated lifting points close to the battery enclosure. Each adapter plugs into one of those points and gives the jack or lift arm a broad rubber contact surface, helping keep metal lifting hardware away from the surrounding underbody.

  • Model 3 / Y / S / X
  • 4 pads + zip storage case
  • 20 mm and 25 mm options
Tesla jack pad adapter positioned on a vehicle lift arm

Purpose-built protection

Why a dedicated jack pad matters

A small adapter solves three common lifting problems before the vehicle leaves the ground.

Locate the right point

Plug into the factory-designated lifting point so the jack meets the adapter instead of an unprotected underbody surface.

Create a rubber buffer

The wide rubber disc separates the metal jack saddle from the vehicle and creates a broad, flat contact surface.

Hold position

The red O-ring adds retention while you align the jack or lift arm, helping keep the adapter in its designated opening.

Jack pad inserted into a Tesla designated lifting point

Proof in the construction

Every visible feature has one lifting job

The molded post locates the vehicle's designated lift point. The red O-ring adds temporary retention while you position the lifting equipment, and the full-width rubber base gives the jack saddle a clear contact surface.

  • Molded post visibly aligns the adapter with the lift-point opening
  • Red O-ring helps hold the pad overhead during jack placement
  • Textured perimeter gives gloved hands a positive removal grip
Thick rubber Tesla jack pad centered on a floor jack saddle

Four-point service set

Four rubber pads, organized for the next lift

Keep the complete set in the included zip case so the correct adapters are ready for tire rotations, wheel service, a two-post lift or an unexpected visit to a tire shop.

  • Four separate pads cover all four designated lifting points
  • Compact zip case keeps the pads together in the trunk or garage
  • Black rubber and a red retention ring are easy to inspect before use

Choose by production factory

The size follows the factory—not the Tesla model.

Tesla's Berlin-Brandenburg factory currently produces Model Y. German-built vehicles use the shallower 20 mm option; vehicles built at Tesla's other factories use the 25 mm option.

25 mm

Built outside Germany

Choose 25 mm when the vehicle's manufacturer label or documents show a factory outside Germany. This is the applicable choice for Model 3, Model S and Model X, and for non-German-built Model Y vehicles.

20 mm

Built in Germany

Choose 20 mm when the vehicle was produced at Gigafactory Berlin-Brandenburg in Grünheide, Germany. Tesla currently identifies Model Y as the vehicle manufactured at this factory.

European delivery clue: a Model Y delivered in Germany, France, Belgium, the Netherlands, Luxembourg, Austria, Switzerland, Italy, Spain, Portugal, Denmark, Sweden, Norway, Finland, Poland or Czechia may be Berlin-built. Delivery country alone is not proof because Tesla can source the same market from different factories. Confirm the country of manufacture on the driver-door label or registration documents; Berlin-built vehicles also use B as the 11th VIN character. If it shows Germany / Berlin / Grünheide, choose 20 mm. Otherwise, choose 25 mm.

Four Tesla jack pad adapters and zippered storage case

Everything together

What is in the case?

A complete four-point set for service at home, at a tire shop or on a workshop lift.

  • Tesla jack pad adapters4
  • Zippered storage case1

Simple three-step setup

Position first. Center the jack. Then lift.

  1. 1. Locate Find the designated lifting point identified in your Tesla owner's manual.
  2. 2. Insert Press the adapter post into the opening until the O-ring holds it in place.
  3. 3. Center and lift Align the jack saddle beneath the pad and follow the equipment manufacturer's lifting procedure.
Illustrated sequence for positioning a Tesla jack pad adapter

Safety: Use only properly rated lifting equipment on a level surface. Follow the vehicle and jack manufacturer's instructions. Never work beneath a vehicle supported only by a jack; use correctly rated stands or a certified lift.

Questions before you lift

Tesla jack pad FAQ

Which Tesla models are these designed for?

They are intended for compatible Tesla Model 3, Model Y, Model S and Model X designated lifting points. The model does not determine pad depth: choose 20 mm for German-built vehicles and 25 mm for vehicles built at Tesla's other factories.

Why are there two size options?

The lift-point depth differs by production factory. The 20 mm version is for vehicles built at Gigafactory Berlin-Brandenburg in Germany; the 25 mm version is for vehicles built at Tesla's other factories.

How do I know whether my Tesla was built in Germany?

Check the country of manufacture on the driver-door label or registration documents. Berlin-built vehicles show Germany, Berlin or Grünheide and use B as the 11th VIN character. A European delivery address is only a clue, not confirmation.

Does the O-ring lock the pad permanently in place?

No. The O-ring adds temporary retention while you position the jack or lift arm. Always center the lifting equipment beneath the adapter and follow standard lifting safety procedures.

How many jack pads are included?

The package contains four jack pad adapters and one zippered storage case.

Can I return an unused set?

Return eligibility is governed by Tesery's current refund policy. Review the latest policy before returning the product.

Keep the right lift-point protection in your trunk.

Choose 20 mm for a German-built vehicle or 25 mm for a vehicle built at another Tesla factory.

Choose your size
Read More
Read Less

All products are shipped out from one of the Signature Autohaus shipping locations. Signature Autohaus drop ships some products and ships direct others. All products are shipped via FedEx, UPS, DHL or another qualified shipping carrier. Special arrangements may need to be made for international orders and oversize packages. In the event a product arrives damaged to your location, please follow the steps listed below. All damaged items must be reported to the shipping carrier immediately and you must notify Signature Autohaus within 5 days of receiving your order. If these steps are not followed, your shipment may not be able to be a candidate for a claim. Complete the Shipping DAMAGE Claim Form by contacting the carrier that delivered your package. 1) Keep the product and its original packaging and box Make a list of the damaged or lost item(s) 2) Signature Autohaus will contact the shipper once we receive the email info above to schedule a pickup, DO NOT send it back to us 3) Once the product is picked up and inspected by Signature Autohaus and or Supplier, a replacement or credit will be issued. 4) The Shipping Rates shown at time of checkout our dimensional rate only. If your shipment weight is to much then contact us for a shipping quote. If there is an error in the shipping rate quoted we will contact you and let you know of the changes. International orders(Outside the USA) are not automatically processed as we may require additional information from you. If a product is ordered and not wanted, the UNUSED item can be returned for a 35% restocking fee. Shipping is not refundable in either direction. All items wanting to be return MUST be reported within 30 days of the original invoice date. No items will be returnable after 30 days. All products shipped from the Signature Autohaus warehouse are shipped via FedEx or Freight and require a signature when delivered. Some packages shipped from the manufacturer may or may not require signatures for package release. Fedex, UPS, and DHL have package pick up locations if you are unable to sign for the package. If the package is returned to Signature Autohaus or manufacturer, you will be responsible for the return shipping costs and pay a 35% restocking fee. These fees will be charged to your account on file. SIGNATURE AUTOHAUS DOES NOT REFUND SHIPPING CHARGES. If you modify, install, or alter the item in any form, we cannot accept it as a return, will not cover any expenses related to the product or installation, and you maybe be required to purchase a replacement. In the event that the product you ordered is sent either incorrectly or processed wrong by Signature Autohaus, we will arrange for the package to come back to us and ship out a replacement. We will evaluate the situation before we determine the shipment was incorrect. To return a item back to us, please do the following: 1. Contact our Customer Service Department to receive a RMA number. All packages returned without a Returned Merchandise Authorization number will be refused. 2. Package the item up in original packaging unless deemed unuseable 3. Include the UNUSED parts and any additional information that was included 4. Include a copy of your receipt 5. Write a brief description of the problem with the product 6. If you have a receipt for the return shipping include as well 7. We DO NOT accept any freight collect packages 8. Once we have received the above information we will notify you via email or phone and let you know the status.

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×