SA Parts Store
×
-8%
Model 52175: Mechanical Safety Relief Valve | 1/4" Male NPT | 175 PSI Pop-Off
Click to zoom in

Need installation?? We can do it.
Contact us BEFORE you buy for a better deal on parts and installation! 1.954.477.0443 or Live Chat

Have Questions? Call or Text Us!

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Performance, Style

  • Wordwide Delivery

    Express shipping on all orders

Model 52175: Mechanical Safety Relief Valve

KL 52175
Fittings > Miscellaneous
$11.99 $10.99
MODEL 52175: SAFETY RELIEF VALVE – 175 PSI POP-OFF – 1/4" NPT ULTIMATE OVER-PRESSURE PROTECTION POLICY...
$10.99

customers are viewing this product
Model 52175: Mechanical Safety Relief Valve

MODEL 52175: SAFETY RELIEF VALVE – 175 PSI POP-OFF – 1/4" NPT

ULTIMATE OVER-PRESSURE PROTECTION POLICY

Safeguard your heavy-duty pneumatic investment with the premium Kleinn Model 52175 Safety Relief Valve. While electronic pressure monitoring networks are designed to automatically cycle your compressor loop off at a set threshold, mechanical hardware failures can still happen. If an automated pressure control switch becomes stuck in the "ON" position, this mechanical pop-off safety valve acts as your permanent insurance policy—automatically venting storage tank air to the atmosphere the moment internal pressure hits 175 PSI, eliminating catastrophic over-pressurization risks.

THE AUDIBLE ALARM EARLY WARNING FAILSAFE

The Model 52175 is precision-engineered to double as an active acoustic diagnostic tool. If you hear this valve discharging repeated, high-pressure manual blasts of air under the chassis, it serves as an unmistakable early warning indicator that your primary pressure control framework has failed to interrupt current delivery. This immediate acoustic alarm lets you know to safely disconnect auxiliary system power and immediately replace your baseline control mechanism before expensive hardware or structural pneumatic loop lines are compromised.

Why Choose the 52175 Safety Relief Valve?

  • Built for 150 PSI Architectures: Calibrated specifically to safeguard configurations operating around a 150 PSI operational window rather than standard generic commercial relief valves.
  • Universal Tank Mounting: Features standard 1/4" Male NPT threads to thread cleanly and securely into any dedicated side or end port on a Kleinn air storage tank.
  • Precision-Calibrated Pop-Off: Tight structural seal limits air loss during normal cycles, remaining fully primed to vent immediate excess pressure right at 175 PSI.
  • Integrated Manual Pull Ring: Outfitted with a durable split manual ring, allowing operators to manually bleed or test tank storage pressure directly in the field.

THE VERDICT: The definitive safety valve for high-pressure configurations. The Model 52175 combines a reliable mechanical pop-off threshold of 175 PSI with an audio warning capability, delivering the crucial failsafe backup your system needs to prevent dangerous over-pressurization on the highway or the trail.

⚠️ Important Compatibility Requirements

The Model 52175 Safety Valve is specialized hardware optimized exclusively for systems running a 150 PSI rating framework. To prevent premature venting or system leaks, this valve should always be paired with compressors and pressure switches engineered to cut out between 145 and 160 PSI.

Confirmed Kleinn Component & System Compatibility Matrix:

  • Model 6275: 150 PSI | 50% Duty Cycle | Medium-Duty System
  • Model 6350: 150 PSI | 100% Duty Cycle | Heavy-Duty Onboard Air System
  • Model 6450 & 6450-Slim: 200 PSI | 100% Duty Cycle | Ultra Heavy-Duty Onboard Air System

Compatible Kit Packages:

  • Universal ProBlaster™ Horn Kits: Models HKUTV, and HK5 through HK9-Slimline
  • Vehicle-Specific Upgrades: Any part number configuration ending natively in -220, -230, -734, or -OBA
  • Mandatory Matching Component: Engineered to pair with the Model 2151 Pressure Switch for automated system safety harmony.

What's Included in the Box

  • Safety Valve: One (1) Model 52175 – 175 PSI Pop-Off – 1/4" Male NPT Mechanical Safety Relief Valve.
  • Manual Interface: One (1) Heavy-duty split manual pull ring actuator pre-installed.

🔴 PRO TIP: Keep a permanent seal on your reservoir tank ports. When installing your 1/4" NPT safety valve, avoid over-torqueing into brass tank bungs to prevent stripping the threads. Always apply a few drops of liquid anaerobic thread sealant compound like our genuine Kleinn JUICE across the NPT male lead threads to block out slow, phantom pneumatic pressure drops.

PRODUCT SPECIFICATIONS

Feature Details
Part Number 52175
Component Classification Pneumatic Safety Relief Valve (Over-Pressure Failsafe)
Pop-Off Calibration Limit 175 PSI Maximum Actuation Boundary
Thread Connection Sizing 1/4" Male NPT (National Pipe Thread)
Primary System Target Optimized for Kleinn 150 PSI Air Systems
Manual Actuation Source Integrated Manual Spring-Loaded Pressure Bleed Pull Ring
Required Companion Switch Model 2151 Pressure Switch (145-160 PSI Cut-Out)
Read More
Read Less

All products are shipped out from one of the Signature Autohaus shipping locations. Signature Autohaus drop ships some products and ships direct others. All products are shipped via FedEx, UPS, DHL or another qualified shipping carrier. Special arrangements may need to be made for international orders and oversize packages. In the event a product arrives damaged to your location, please follow the steps listed below. All damaged items must be reported to the shipping carrier immediately and you must notify Signature Autohaus within 5 days of receiving your order. If these steps are not followed, your shipment may not be able to be a candidate for a claim. Complete the Shipping DAMAGE Claim Form by contacting the carrier that delivered your package. 1) Keep the product and its original packaging and box Make a list of the damaged or lost item(s) 2) Signature Autohaus will contact the shipper once we receive the email info above to schedule a pickup, DO NOT send it back to us 3) Once the product is picked up and inspected by Signature Autohaus and or Supplier, a replacement or credit will be issued. 4) The Shipping Rates shown at time of checkout our dimensional rate only. If your shipment weight is to much then contact us for a shipping quote. If there is an error in the shipping rate quoted we will contact you and let you know of the changes. International orders(Outside the USA) are not automatically processed as we may require additional information from you. If a product is ordered and not wanted, the UNUSED item can be returned for a 35% restocking fee. Shipping is not refundable in either direction. All items wanting to be return MUST be reported within 30 days of the original invoice date. No items will be returnable after 30 days. All products shipped from the Signature Autohaus warehouse are shipped via FedEx or Freight and require a signature when delivered. Some packages shipped from the manufacturer may or may not require signatures for package release. Fedex, UPS, and DHL have package pick up locations if you are unable to sign for the package. If the package is returned to Signature Autohaus or manufacturer, you will be responsible for the return shipping costs and pay a 35% restocking fee. These fees will be charged to your account on file. SIGNATURE AUTOHAUS DOES NOT REFUND SHIPPING CHARGES. If you modify, install, or alter the item in any form, we cannot accept it as a return, will not cover any expenses related to the product or installation, and you maybe be required to purchase a replacement. In the event that the product you ordered is sent either incorrectly or processed wrong by Signature Autohaus, we will arrange for the package to come back to us and ship out a replacement. We will evaluate the situation before we determine the shipment was incorrect. To return a item back to us, please do the following: 1. Contact our Customer Service Department to receive a RMA number. All packages returned without a Returned Merchandise Authorization number will be refused. 2. Package the item up in original packaging unless deemed unuseable 3. Include the UNUSED parts and any additional information that was included 4. Include a copy of your receipt 5. Write a brief description of the problem with the product 6. If you have a receipt for the return shipping include as well 7. We DO NOT accept any freight collect packages 8. Once we have received the above information we will notify you via email or phone and let you know the status.

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×