Showcase your performance credentials with our premium PLAID letter badge emblem. Crafted from durable alloy with your choice of four stunning finishes, this high-quality emblem adds a sporty, exclusive touch to your vehicle—celebrating the ultimate in electric performance with the iconic PLAID designation that represents Tesla's fastest, most powerful models.
Choose Your Finish:
-
Glossy Black: Deep, reflective black finish—sleek and sophisticated appearance
-
Matte Black: Non-reflective black finish—stealthy, murdered-out aesthetic
-
Red: Bold red finish—sporty, high-performance look
-
Silver: Classic metallic silver—timeless, elegant appearance
Why Choose This PLAID Badge?
-
Premium Alloy Construction: Made from high-quality metal alloy—strong, durable, and resistant to fading, cracking, or peeling unlike cheap plastic badges.
-
Performance Statement: PLAID designation represents Tesla's ultimate performance tier—showcases your vehicle's elite status and incredible capabilities.
-
Bright, Vibrant Colors: Professional-grade finish maintains brilliant color and shine—won't fade from sun exposure or car washes.
-
3M Automotive Adhesive: Industrial-strength 3M adhesive backing ensures permanent bond—won't fall off during rain, car washes, or extreme weather.
-
Easy Peel-and-Stick Installation: Simple installation in seconds—no tools, drilling, or modifications required, completely reversible.
-
Weather-Resistant Design: Withstands rain, snow, sun, and temperature extremes—maintains appearance and adhesion in all conditions.
-
Stylish & Dynamic Appearance: Adds sporty, performance-oriented aesthetic to your vehicle—enhances overall look with minimal investment.
-
Universal Placement: Apply anywhere on flat surfaces—fenders, trunk, doors, interior trim, or dashboard.
-
OEM-Quality Finish: Professional appearance that looks factory-installed—premium alternative to expensive dealer badges.
-
Universal Compatibility: Perfect for Model 3, Y, S, X, and even Cybertruck—works on any vehicle you want to customize.
Perfect Placement Ideas:
- 🚗 Rear fenders (classic performance badge location)
- 🎯 Trunk lid or liftgate
- 🚪 Front fenders
- 📱 Dashboard or center console
- 🪟 Door sills or B-pillars
- 🎨 Interior trim panels
- ⚡ Charging port door
- 🔧 Frunk lid
Complete Your Performance Look
Build a cohesive performance aesthetic with these complementary upgrades:
Product Specifications:
- Type: PLAID letter badge emblem
- Material: Premium metal alloy (durable and fade-resistant)
- Finish Options: Glossy Black, Matte Black, Red, or Silver
- Adhesive: 3M automotive-grade adhesive backing
- Installation: Peel-and-stick (no tools required)
- Weather Resistance: All-weather rated (rain, snow, sun)
- Durability: Fade-resistant, crack-resistant, peel-resistant
- Appearance: Bright colors, stylish and dynamic
- Compatibility: Universal—Model 3, Y, S, X, Cybertruck, any vehicle
- Placement: Any flat surface (exterior or interior)
- Removability: Can be removed if desired (adhesive is strong but removable)
Installation Guide:
Surface Preparation (Critical for Best Results):
- Choose flat, smooth placement location (avoid curved surfaces)
- Clean surface thoroughly with isopropyl alcohol (70%+)
- Ensure surface is completely dry and free of dust, oil, wax, or moisture
- Work in moderate temperature (60-80°F / 15-27°C) for best adhesion
Installation Steps:
- Test fit badge position before removing adhesive backing
- Mark placement with painter's tape if desired for perfect alignment
- Peel off adhesive backing carefully
- Align badge with desired position
- Press firmly in center, then work outward to edges
- Apply firm, even pressure across entire badge for 30 seconds
- Press edges firmly to ensure complete contact
- Allow adhesive to cure for 24 hours before car wash or rain exposure
Installation Time: Less than 5 minutes. No tools required.
Package Includes:
- 1x PLAID Letter Badge Emblem (finish as selected)
- Pre-applied 3M adhesive backing
- Installation instructions
Care & Maintenance:
- Wait 24 hours after installation before washing vehicle
- Hand wash recommended for first few weeks
- Avoid high-pressure washers directly on badge edges
- Use pH-neutral car wash soap
- Dry with microfiber towel to prevent water spots
- Inspect adhesion periodically, especially after extreme weather
- The alloy construction won't fade or degrade like plastic badges
Pro Tips for Best Results:
- Clean surface twice—once with soap, then again with isopropyl alcohol
- Work in shade or garage to avoid direct sunlight heating adhesive
- Use painter's tape to mark exact position before applying
- Press firmly for full 30 seconds—proper pressure ensures strong bond
- Avoid touching adhesive side with fingers (oils reduce adhesion)
- Popular placement: rear fenders matching OEM performance badge location
- Consider multiple badges for symmetrical placement on both sides
- The matte black finish pairs perfectly with chrome delete modifications
Removal Instructions (If Needed):
- Warm badge with heat gun or hair dryer on LOW setting
- Gently peel from one corner, applying heat as you go
- Pull slowly at 45-degree angle to avoid surface damage
- Remove any adhesive residue with isopropyl alcohol or adhesive remover
- Surface should be undamaged and ready for new badge if desired
What Does PLAID Mean?
PLAID is Tesla's designation for their highest-performance powertrain configuration, representing:
- ⚡ Tri-motor all-wheel drive (three independent motors)
- 🚀 0-60 mph in under 2 seconds (Model S Plaid)
- 💨 Over 1,000 horsepower
- 🏁 Top speeds exceeding 200 mph
- 🎯 Ultimate performance and acceleration
- 👑 Flagship tier above Long Range and Performance variants
Advantages of This Badge:
- ✓ Premium alloy construction (vs. cheap plastic)
- ✓ 4 finish options (match your aesthetic)
- ✓ 3M adhesive (industrial-strength bond)
- ✓ Fade-resistant (maintains color and shine)
- ✓ Weather-resistant (all-season durability)
- ✓ Easy installation (peel-and-stick simplicity)
- ✓ OEM-quality appearance (looks factory-installed)
- ✓ Universal compatibility (any vehicle, any location)
- ✓ Affordable upgrade (premium look, minimal cost)
Quality Guarantee: Backed by our 30-day satisfaction guarantee. If you experience any issues with quality or adhesion, we'll make it right.
Celebrate ultimate performance with the iconic PLAID badge. Select your preferred finish and add to cart for a premium, sporty upgrade that showcases your vehicle's elite status.
All products are shipped out from one of the Signature Autohaus shipping locations. Signature Autohaus drop ships some products and ships direct others. All products are shipped via FedEx, UPS, DHL or another qualified shipping carrier.
Special arrangements may need to be made for international orders and oversize packages.
In the event a product arrives damaged to your location, please follow the steps listed below. All damaged items must be reported to the shipping carrier immediately and you must notify Signature Autohaus within 5 days of receiving your order. If these steps are not followed, your shipment may not be able to be a candidate for a claim.
Complete the Shipping DAMAGE Claim Form by contacting the carrier that delivered your package.
1) Keep the product and its original packaging and box
Make a list of the damaged or lost item(s)
2) Signature Autohaus will contact the shipper once we receive the email info above to schedule a pickup, DO NOT send it back to us
3) Once the product is picked up and inspected by Signature Autohaus and or Supplier, a replacement or credit will be issued.
4) The Shipping Rates shown at time of checkout our dimensional rate only. If your shipment weight is to much then contact us for a shipping quote. If there is an error in the shipping rate quoted we will contact you and let you know of the changes. International orders(Outside the USA) are not automatically processed as we may require additional information from you.
If a product is ordered and not wanted, the UNUSED item can be returned for a 35% restocking fee. Shipping is not refundable in either direction. All items wanting to be return MUST be reported within 30 days of the original invoice date. No items will be returnable after 30 days. All products shipped from the Signature Autohaus warehouse are shipped via FedEx or Freight and require a signature when delivered. Some packages shipped from the manufacturer may or may not require signatures for package release. Fedex, UPS, and DHL have package pick up locations if you are unable to sign for the package. If the package is returned to Signature Autohaus or manufacturer, you will be responsible for the return shipping costs and pay a 35% restocking fee. These fees will be charged to your account on file.
SIGNATURE AUTOHAUS DOES NOT REFUND SHIPPING CHARGES. If you modify, install, or alter the item in any form, we cannot accept it as a return, will not cover any expenses related to the product or installation, and you maybe be required to purchase a replacement.
In the event that the product you ordered is sent either incorrectly or processed wrong by Signature Autohaus, we will arrange for the package to come back to us and ship out a replacement. We will evaluate the situation before we determine the shipment was incorrect.
To return a item back to us, please do the following:
1. Contact our Customer Service Department to receive a RMA number. All packages returned without a Returned Merchandise Authorization number will be refused.
2. Package the item up in original packaging unless deemed unuseable
3. Include the UNUSED parts and any additional information that was included
4. Include a copy of your receipt
5. Write a brief description of the problem with the product
6. If you have a receipt for the return shipping include as well
7. We DO NOT accept any freight collect packages
8. Once we have received the above information we will notify you via email or phone and let you know the status.
