SA Parts Store
×
-34%

Need installation?? We can do it.
Contact us BEFORE you buy for a better deal on parts and installation! 1.954.477.0443 or Live Chat

Have Questions? Call or Text Us!

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Performance, Style

  • Wordwide Delivery

    Express shipping on all orders

Stainless Steel Trunk Sill Protector for Tesla Model Y 2020–Mar 2025

TSL0237-A
Interior Decoration
$39.98 $25.99
TESERY · Model Y Trunk Sill Protector The edge your luggagemeets first. A two-piece stamped stainless-steel...
$25.99

customers are viewing this product

TESERY · Model Y Trunk Sill Protector

The edge your luggage
meets first.

A two-piece stamped stainless-steel protector that covers the inside trunk loading sill of a compatible Tesla Model Y.

Illustrative rear view of a carbon-fiber-pattern two-piece trunk sill protector installed in a pre-refresh Tesla Model Y
Installation illustration. Match your production plant and existing sill shape before ordering.
Stamped stainless steelTwo-piece setAdhesive installation

See the change

A finished surface
at the loading edge.

The protector adds a visible metal layer over the original inside sill where bags, boxes and luggage pass into the trunk.

Same-viewpoint illustration of the Tesla Model Y trunk sill before and after fitting the two-piece protector
Appearance illustration. The original sill is shown undamaged and no wear test is implied.

Built around the trunk

Two pieces.
One fitted edge.

The left and right panels meet around the centre latch while retaining the existing cargo-point openings shown. The formed ribs follow the loading edge and make the protector easy to recognise at a glance.

Two-piece Tesla Model Y trunk sill protector fitted around the centre latch and cargo points

Shaped for the sill

The two-piece layout follows the installed geometry shown in the product-source image.

Close-up of the carbon-fiber-pattern protector fitted around the centre trunk latch

See the exact location

This product covers the inside trunk loading sill. It is not an exterior rear-bumper protector.

Material and finish

Stainless steel.
Three looks.

Each version uses stamped stainless steel. Choose the surface that fits your trunk: carbon-fiber pattern, black or brushed silver.

Carbon Fiber is a patterned finish applied to stainless steel. It is not real carbon fiber.

Product-source detail showing stamped stainless steel and the carbon-fiber-pattern finish

Choose your finish

Same form.
Different surface.

Comparison of carbon-fiber-pattern, black and brushed-silver trunk sill protector finishes

Select one finish. Screen settings and lighting can affect how the colour and reflection appear.

Fitment first

Check before you order.

FitsTesla Model Y, 2020 through March 2025, with the pre-refresh trunk-sill shape shown.
Does not fitAustin-built Model Y vehicles under this listing.
Does not fitModel Y Juniper. Choose a Juniper-specific product instead.
Fitment guide for Model Y 2020 through March 2025, excluding Austin-built vehicles and Juniper

Registration year alone may not identify every production change. Confirm the production plant and compare your existing sill with the shape shown.

Installation

Clean. Align.
Press.

  1. Clean and dry the sill. Remove dust, oil and loose protectant.
  2. Test-fit both pieces. Check the centre latch and cargo-point openings before exposing the adhesive.
  3. Peel, align and press. Remove the backing only after the position is confirmed, then press evenly across both panels.
  4. Check operation. Gently test the tailgate closure. Stop and reposition the panels if there is any interference.
Four-step adhesive installation guide for the two-piece Model Y trunk sill protector

No installation-time or guaranteed-clearance claim is made. Follow any instructions supplied with the product.

In the package

One complete
two-piece set.

Two-piece carbon-fiber-pattern stainless steel trunk sill protector on white

You receive one left-and-right protector set in the finish selected. The vehicle and any cargo shown are not included.

For routine care, wipe with a soft damp cloth. Avoid abrasive cleaners and harsh chemicals.

Useful answers

Know before you choose.

Where does this protector install?

It installs on the inside trunk loading sill around the centre latch. It does not cover the exterior painted bumper.

Is the Carbon Fiber finish real carbon fiber?

No. It is a carbon-fiber-pattern surface on stamped stainless steel.

Does it fit an Austin-built Model Y or Model Y Juniper?

No. This listing excludes Austin-built Model Y vehicles and Model Y Juniper. Match the production plant and the existing sill shape before ordering.

What is included?

One two-piece trunk sill protector set in the selected finish: Carbon Fiber pattern, Black or Silver.

Does installation require drilling?

The supplied panels use pre-applied double-sided adhesive. Test-fit before removing the backing and check tailgate operation after installation.

Will it interfere with the tailgate?

Correct position and vehicle fitment matter. Gently test closure after installation and stop if you notice contact or resistance. Guaranteed clearance is not claimed.

Read More
Read Less

All products are shipped out from one of the Signature Autohaus shipping locations. Signature Autohaus drop ships some products and ships direct others. All products are shipped via FedEx, UPS, DHL or another qualified shipping carrier. Special arrangements may need to be made for international orders and oversize packages. In the event a product arrives damaged to your location, please follow the steps listed below. All damaged items must be reported to the shipping carrier immediately and you must notify Signature Autohaus within 5 days of receiving your order. If these steps are not followed, your shipment may not be able to be a candidate for a claim. Complete the Shipping DAMAGE Claim Form by contacting the carrier that delivered your package. 1) Keep the product and its original packaging and box Make a list of the damaged or lost item(s) 2) Signature Autohaus will contact the shipper once we receive the email info above to schedule a pickup, DO NOT send it back to us 3) Once the product is picked up and inspected by Signature Autohaus and or Supplier, a replacement or credit will be issued. 4) The Shipping Rates shown at time of checkout our dimensional rate only. If your shipment weight is to much then contact us for a shipping quote. If there is an error in the shipping rate quoted we will contact you and let you know of the changes. International orders(Outside the USA) are not automatically processed as we may require additional information from you. If a product is ordered and not wanted, the UNUSED item can be returned for a 35% restocking fee. Shipping is not refundable in either direction. All items wanting to be return MUST be reported within 30 days of the original invoice date. No items will be returnable after 30 days. All products shipped from the Signature Autohaus warehouse are shipped via FedEx or Freight and require a signature when delivered. Some packages shipped from the manufacturer may or may not require signatures for package release. Fedex, UPS, and DHL have package pick up locations if you are unable to sign for the package. If the package is returned to Signature Autohaus or manufacturer, you will be responsible for the return shipping costs and pay a 35% restocking fee. These fees will be charged to your account on file. SIGNATURE AUTOHAUS DOES NOT REFUND SHIPPING CHARGES. If you modify, install, or alter the item in any form, we cannot accept it as a return, will not cover any expenses related to the product or installation, and you maybe be required to purchase a replacement. In the event that the product you ordered is sent either incorrectly or processed wrong by Signature Autohaus, we will arrange for the package to come back to us and ship out a replacement. We will evaluate the situation before we determine the shipment was incorrect. To return a item back to us, please do the following: 1. Contact our Customer Service Department to receive a RMA number. All packages returned without a Returned Merchandise Authorization number will be refused. 2. Package the item up in original packaging unless deemed unuseable 3. Include the UNUSED parts and any additional information that was included 4. Include a copy of your receipt 5. Write a brief description of the problem with the product 6. If you have a receipt for the return shipping include as well 7. We DO NOT accept any freight collect packages 8. Once we have received the above information we will notify you via email or phone and let you know the status.

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×