SA Parts Store
×
-21%

Need installation?? We can do it.
Contact us BEFORE you buy for a better deal on parts and installation! 1.954.477.0443 or Live Chat

Have Questions? Call or Text Us!

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Performance, Style

  • Wordwide Delivery

    Express shipping on all orders

TESERY Model 3 / Y Carbon Fiber Spoiler

TSL8302-newY-A
Carbon Fiber Spoiler
$369.00 $289.00
Tesla Model Y & Model 3 · V-Style Spoiler A Sharper Rear Profile for Your Tesla....
$289.00

customers are viewing this product

Tesla Model Y & Model 3 · V-Style Spoiler

A Sharper Rear Profile for Your Tesla.

Give your Model Y or Model 3 a more distinctive rear profile with a sculpted V-Style carbon fiber spoiler. Raised outer corners and a sweeping center create a more pronounced silhouette from every angle.

  • V-Style Design
  • Vehicle-Specific Versions
  • Three Carbon Fiber Options
TESERY V-Style carbon fiber spoiler installed on a Tesla Model Y
Installed appearance shown for reference. Select the version made for your vehicle generation.

Start With Your Vehicle

Find the Right Fit for Your Tesla.

Choose your vehicle generation first, then select your carbon fiber finish. Each listed version is shaped for its corresponding trunk contour.

Vehicle Version Listed Range Available Options
Model Y Juniper March 2025–Present Matte, Glossy & Forged Carbon Fiber
Model 3 Highland 2024–Present Matte, Glossy & Forged Carbon Fiber
Model Y — Pre-Juniper 2020–February 2025 Matte, Glossy & Forged Carbon Fiber
Model 3 — Pre-Highland 2017–October 2023 Matte, Glossy & Forged Carbon Fiber

Buying near a model changeover? These ranges follow the product selector. Confirm your actual body generation rather than relying only on registration or delivery year. For help, send your model, year and a clear rear photo to support@tesery.com. If your car already has a spoiler, include it in the photo.

V-Style Tesla carbon fiber spoiler showing its center sweep and raised outer corners

A More Distinctive Silhouette

Make the Rear View Your Own.

The V-Style profile brings more visual presence than a low-profile trunk lip. Its raised ends and sculpted center add definition across the rear of your Tesla.

  • A stronger outline: an elevated profile visible from behind and from the side.
  • Carbon fiber detail: choose a surface that complements your paint and exterior trim.
  • A coordinated look: pair it with your existing carbon fiber accessories or make it the starting point for your exterior upgrades.

Finish & Pattern

Three Ways to Finish Your Build.

Keep the look understated, highlight the carbon weave, or choose the distinctive texture of forged carbon fiber.

Matte Carbon Fiber

Subtle Texture. Softer Reflections.

A woven carbon appearance with a low-sheen finish. Choose matte for a more understated look alongside satin or matte exterior details.

Glossy Carbon Fiber

Visible Weave. Reflective Finish.

A glossy surface that highlights the woven pattern and sculpted shape. A natural choice when you prefer a polished carbon fiber look.

Forged Carbon Fiber

A Distinctive Flake Pattern.

An irregular carbon pattern with a different visual character from woven carbon. Choose forged when you want the texture itself to stand out.

Matching existing accessories? Compare close-up photos before ordering. Weave direction, pattern scale and surface sheen can vary between products and production batches.

Adhesive Installation

Check the Fit. Set the Alignment. Apply.

Supplied with 3M VHB double-sided tape. Take time to check the fit and prepare the mounting surface before exposing the adhesive.

  1. 1. Inspect and dry-fit Leave the adhesive backing in place. Set the spoiler on the closed trunk and check the centerline, both ends and contact along the mounting surface.
  2. 2. Prepare and mark Follow the installation instructions to prepare a clean, dry mounting surface. Mark the alignment with removable positioning tape before bonding.
  3. 3. Bond and allow time to set Position carefully and apply pressure as directed. Follow the adhesive instructions for application temperature and the waiting period before washing or driving.

Product video for shape and appearance reference. Choose your vehicle version using the product selector.

Check before bonding: If the spoiler does not sit naturally during the dry fit, keep the adhesive backing intact and contact us with photos of the fit.

Existing spoiler, PPF or ceramic coating? Contact us before installation so the mounting surface and preparation requirements can be checked. A professional installer can also help with existing adhesive removal and accurate alignment.

See the Details

Picture It on Your Tesla.

Look beyond the carbon pattern. The height, center sweep and raised corners all shape how the spoiler looks on your car.

  • Rear view: see how the V-Style outline frames the trunk.
  • Side profile: compare the raised edge with the silhouette you want.
  • Finish details: compare texture and reflections with your existing trim.

Looking for owner feedback? Check the customer reviews on this page, especially photos and comments for your vehicle generation and chosen finish.

Rear view of a Tesla fitted with the TESERY V-Style carbon fiber spoiler
Installed appearance reference. Spoiler contour varies with the selected vehicle version.

Before You Order

Your Spoiler Questions, Answered.

Which version fits my Tesla?

Choose the option matching your actual vehicle generation: Model Y Juniper, Model Y before Juniper, Model 3 Highland, or Model 3 before Highland. These versions have different trunk contours and should not be substituted for one another.

For a vehicle near a model changeover, send your model, year and a rear photo to support@tesery.com before ordering.

Does this fit the Model Y Juniper or Model 3 Highland?

Yes. The product selector includes separate versions listed for Model Y Juniper March 2025–Present and Model 3 Highland 2024–Present. Select the corresponding version rather than a pre-refresh option.

Should I choose matte, glossy or forged carbon fiber?

Matte offers a lower-sheen woven appearance. Glossy highlights the weave with stronger reflections. Forged carbon fiber has an irregular flake pattern rather than a regular weave.

If you already have carbon fiber accessories, compare their texture and sheen with the product photos. An exact match across different products or batches is not guaranteed.

What if my Tesla already has a factory or aftermarket spoiler?

Contact us with a clear photo of your current spoiler before ordering. Existing spoiler and adhesive removal requirements need to be checked for your setup. Do not assume this product can be attached over an existing spoiler.

How is the spoiler installed?

Installation uses the supplied 3M VHB double-sided tape. Dry-fit with the backing intact, check alignment and surface contact, then follow the installation instructions for surface preparation, pressure and adhesive setting time.

If the fit looks uneven before bonding, stop and contact us with photos rather than forcing the spoiler into place.

When can I wash my car after installation?

Follow the waiting period specified in the adhesive installation instructions. Bond development depends on the tape, temperature and mounting surface. If the instructions do not specify a waiting period, contact us before washing.

For ongoing care, use a soft cloth and a mild vehicle-safe cleaner. Avoid abrasive pads and close high-pressure spray at the bonded edges.

Can it be installed over PPF or ceramic coating?

Film and coatings can change how adhesive bonds to the surface. Contact us with details of your existing protection before installation, and ask your film or coating installer about appropriate surface preparation.

Does it improve range or downforce?

This spoiler is offered primarily as an exterior styling upgrade. No controlled aerodynamic test results are published for this listing, so a measurable change in range, drag or downforce is not promised.

Can the spoiler be removed later?

Removal depends on the adhesive bond and the condition of the mounting surface. A professional detailer or body shop can help with removal and adhesive cleanup. Residue-free or damage-free removal cannot be guaranteed.

What are the return conditions?

Return requests must be initiated within 30 days of receiving your item. Eligible returns must meet the condition and packaging requirements in our return policy .

Non-quality-related returns are subject to a 15% restocking fee, and the customer pays return shipping. Check the vehicle version, finish and fit before exposing the adhesive. If you have already peeled the backing or installed the spoiler, contact us for an eligibility review before returning it.

Email support@tesery.com with your order number and reason for the request. Please wait for approval and return instructions before sending the product back.

What if my spoiler arrives damaged, incorrect or does not fit?

Contact support@tesery.com with your order number, vehicle model and year, and clear photos of the product and issue. For fitment concerns, include photos of both ends and the center during a dry fit.

Keep the packaging and leave the adhesive backing intact while we review the issue. Confirmed defective, damaged or incorrectly supplied items are handled under our quality-issue return policy .

Finish Your Tesla’s Rear Profile.

Choose your vehicle generation, then find the carbon fiber finish that suits your build.

Choose Your Spoiler

Free worldwide shipping on orders US$149+. Eligible return requests within 30 days.

Read More
Read Less

All products are shipped out from one of the Signature Autohaus shipping locations. Signature Autohaus drop ships some products and ships direct others. All products are shipped via FedEx, UPS, DHL or another qualified shipping carrier. Special arrangements may need to be made for international orders and oversize packages. In the event a product arrives damaged to your location, please follow the steps listed below. All damaged items must be reported to the shipping carrier immediately and you must notify Signature Autohaus within 5 days of receiving your order. If these steps are not followed, your shipment may not be able to be a candidate for a claim. Complete the Shipping DAMAGE Claim Form by contacting the carrier that delivered your package. 1) Keep the product and its original packaging and box Make a list of the damaged or lost item(s) 2) Signature Autohaus will contact the shipper once we receive the email info above to schedule a pickup, DO NOT send it back to us 3) Once the product is picked up and inspected by Signature Autohaus and or Supplier, a replacement or credit will be issued. 4) The Shipping Rates shown at time of checkout our dimensional rate only. If your shipment weight is to much then contact us for a shipping quote. If there is an error in the shipping rate quoted we will contact you and let you know of the changes. International orders(Outside the USA) are not automatically processed as we may require additional information from you. If a product is ordered and not wanted, the UNUSED item can be returned for a 35% restocking fee. Shipping is not refundable in either direction. All items wanting to be return MUST be reported within 30 days of the original invoice date. No items will be returnable after 30 days. All products shipped from the Signature Autohaus warehouse are shipped via FedEx or Freight and require a signature when delivered. Some packages shipped from the manufacturer may or may not require signatures for package release. Fedex, UPS, and DHL have package pick up locations if you are unable to sign for the package. If the package is returned to Signature Autohaus or manufacturer, you will be responsible for the return shipping costs and pay a 35% restocking fee. These fees will be charged to your account on file. SIGNATURE AUTOHAUS DOES NOT REFUND SHIPPING CHARGES. If you modify, install, or alter the item in any form, we cannot accept it as a return, will not cover any expenses related to the product or installation, and you maybe be required to purchase a replacement. In the event that the product you ordered is sent either incorrectly or processed wrong by Signature Autohaus, we will arrange for the package to come back to us and ship out a replacement. We will evaluate the situation before we determine the shipment was incorrect. To return a item back to us, please do the following: 1. Contact our Customer Service Department to receive a RMA number. All packages returned without a Returned Merchandise Authorization number will be refused. 2. Package the item up in original packaging unless deemed unuseable 3. Include the UNUSED parts and any additional information that was included 4. Include a copy of your receipt 5. Write a brief description of the problem with the product 6. If you have a receipt for the return shipping include as well 7. We DO NOT accept any freight collect packages 8. Once we have received the above information we will notify you via email or phone and let you know the status.

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×