SA Parts Store
×
-18%

Need installation?? We can do it.
Contact us BEFORE you buy for a better deal on parts and installation! 1.954.477.0443 or Live Chat

Have Questions? Call or Text Us!

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Performance, Style

  • Wordwide Delivery

    Express shipping on all orders

TESERY Rear Side Window Louvers Cover for Model Y

TSL1503
Exterior trim
$49.99 $40.99
TESERY · Model Y quarter-window louvers A sharperpoint of view. A small detail. A different impression....
$40.99

customers are viewing this product

TESERY · Model Y quarter-window louvers

A sharper
point of view.

A small detail. A different impression.

Turn the quietest corner of your Model Y into a sculpted exterior accent. Raised blades add depth to the rear quarter glass, while three finish options let you decide how boldly it stands out.

Model Y 2020+3 finishesLeft + right pair
Glossy carbon-fiber-pattern ABS Model Y quarter window louvers, shown as a matching left and right pair.
Carbon-pattern louver shown on the small fixed rear quarter window of a black pre-refresh Model Y.
Styling illustration on a pre-refresh Model Y. The cover sits on the fixed quarter glass behind the rear door.

The difference you see

From flat glass.
To defined lines.

The tapered outline follows the rear quarter window, while the raised faces catch light and create shadow. It is a focused styling change that brings a more pronounced finish to the side of your car.

Intact original rear quarter glass in the same-angle before-installation styling illustration.
BEFOREOriginal quarter glass
The same view with the sculpted carbon-pattern quarter-window louver installed.
AFTERSculpted louver detail

Same-angle appearance illustration. The original glass is shown intact.

Original owner video

A look back.
At the earlier design.

This original video shows an earlier louver design. Refer to the current product and finish images on this page for the shape supplied with this listing.

Choose your finish

Three ways
to make it yours.

Each finish uses the same sculpted shape. Your selection applies to both covers in the pair.

Glossy carbon-fiber texture finish, left and right louver pair.

Glossy carbon fiber texture

A fine diagonal pattern with a reflective surface. Carbon-fiber styling on an ABS body.

Glossy black ABS finish, left and right louver pair.

Glossy black

Smooth black faces with clear reflections that bring out the contours.

Matte black ABS finish, left and right louver pair.

Matte black

A lower-sheen surface for a quieter expression of the same bold shape.

Form and surface

Depth in the shape.
Detail in the finish.

Molded ABS forms the tapered frame and raised louver faces. On the carbon-pattern option, the diagonal surface texture adds another layer of visual detail.

The carbon fiber texture option is a decorative finish over ABS. It is not a solid carbon-fiber part.

Original TESERY close-up of the glossy diagonal carbon pattern on the molded ABS cover.

Your car. Your pair.

Both sides.
One complete look.

Vehicle compatibility
Tesla Model Y 2020+, including Juniper
Installation location
Exterior of the fixed rear quarter windows
Included
2 covers: one left, one right; adhesive included
Construction
ABS body in your selected finish

Compare both covers with your quarter-glass outline before removing the adhesive liner, especially around model changes. Contact TESERY with your vehicle year and a window photo if you need a fit check.

The three finish options share the listed Model Y fitment. Vehicle and other accessories pictured are not included.

Adhesive installation

A careful start.
A finished detail.

01Compare and prepare. Identify the left and right cover, check the dry fit, then clean the glass and let it dry fully.
02Align and bond. Peel the liner, position the cover carefully and apply firm, even pressure along the bonding surfaces. No drilling or glass replacement is required.
03Allow the adhesive to set. Follow the supplied guidance and avoid washing the car for 48 hours. Check secure adhesion before driving.

Louvers partially cover the quarter glass. Check your sightlines and applicable visibility requirements before bonding.

Original TESERY gallery close-up showing the adhesive release liner peeling away from the backing.

Before you choose

A few useful answers.

Is this a styling accessory or a performance upgrade?

Choose these louvers for their sculpted exterior appearance. No aerodynamic, range, heat-reduction or theft-protection rating is provided for this product.

How much of the quarter window does it cover?

The frame and raised blades cover part of the small rear quarter window. Screening and the view through the openings vary with angle, light and the tint of your glass. Check the view from inside your vehicle during the dry fit.

How should I clean the covers?

Use mild soap, water and a soft cloth. Clean gently around the openings, avoid abrasive products and check the adhesive bond periodically.

Can I remove them later?

Adhesive installation is intended to stay in place. Removal takes care and may require adhesive cleanup and new tape before reuse. Contact TESERY for guidance rather than pulling the panel off the glass.

Where can I get fitment or order support?

Contact support@tesery.com with your order or vehicle details. Delivery and returns follow the current shipping policy and return policy.

Choose your finish. Give both sides a more distinctive look.

Read More
Read Less

All products are shipped out from one of the Signature Autohaus shipping locations. Signature Autohaus drop ships some products and ships direct others. All products are shipped via FedEx, UPS, DHL or another qualified shipping carrier. Special arrangements may need to be made for international orders and oversize packages. In the event a product arrives damaged to your location, please follow the steps listed below. All damaged items must be reported to the shipping carrier immediately and you must notify Signature Autohaus within 5 days of receiving your order. If these steps are not followed, your shipment may not be able to be a candidate for a claim. Complete the Shipping DAMAGE Claim Form by contacting the carrier that delivered your package. 1) Keep the product and its original packaging and box Make a list of the damaged or lost item(s) 2) Signature Autohaus will contact the shipper once we receive the email info above to schedule a pickup, DO NOT send it back to us 3) Once the product is picked up and inspected by Signature Autohaus and or Supplier, a replacement or credit will be issued. 4) The Shipping Rates shown at time of checkout our dimensional rate only. If your shipment weight is to much then contact us for a shipping quote. If there is an error in the shipping rate quoted we will contact you and let you know of the changes. International orders(Outside the USA) are not automatically processed as we may require additional information from you. If a product is ordered and not wanted, the UNUSED item can be returned for a 35% restocking fee. Shipping is not refundable in either direction. All items wanting to be return MUST be reported within 30 days of the original invoice date. No items will be returnable after 30 days. All products shipped from the Signature Autohaus warehouse are shipped via FedEx or Freight and require a signature when delivered. Some packages shipped from the manufacturer may or may not require signatures for package release. Fedex, UPS, and DHL have package pick up locations if you are unable to sign for the package. If the package is returned to Signature Autohaus or manufacturer, you will be responsible for the return shipping costs and pay a 35% restocking fee. These fees will be charged to your account on file. SIGNATURE AUTOHAUS DOES NOT REFUND SHIPPING CHARGES. If you modify, install, or alter the item in any form, we cannot accept it as a return, will not cover any expenses related to the product or installation, and you maybe be required to purchase a replacement. In the event that the product you ordered is sent either incorrectly or processed wrong by Signature Autohaus, we will arrange for the package to come back to us and ship out a replacement. We will evaluate the situation before we determine the shipment was incorrect. To return a item back to us, please do the following: 1. Contact our Customer Service Department to receive a RMA number. All packages returned without a Returned Merchandise Authorization number will be refused. 2. Package the item up in original packaging unless deemed unuseable 3. Include the UNUSED parts and any additional information that was included 4. Include a copy of your receipt 5. Write a brief description of the problem with the product 6. If you have a receipt for the return shipping include as well 7. We DO NOT accept any freight collect packages 8. Once we have received the above information we will notify you via email or phone and let you know the status.

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×