SA Parts Store
×
-55%

Need installation?? We can do it.
Contact us BEFORE you buy for a better deal on parts and installation! 1.954.477.0443 or Live Chat

Have Questions? Call or Text Us!

  • Guaranteed Fitment

    Always the correct part

  • In-House Experts

    We know our products

  • Added Value

    Performance, Style

  • Wordwide Delivery

    Express shipping on all orders

TESERY Tesla Model 3 Fog Light Trim - Carbon Fiber Exterior Mods

TSL3404
Carbon Fiber
$340.00 $149.99
  Give Your Model 3 the Aggressive Edge It Deserves. Transform the predictable front end of...
$149.99

customers are viewing this product

 

Give Your Model 3 the Aggressive Edge It Deserves.

Transform the predictable front end of your Tesla Model 3 (2017-2023) with our genuine carbon fiber fog light trim. This "air knife" inspired overlay instantly adds a wider, track-ready stance and undeniable motorsport aesthetics to your daily drive.

🏁 100% Genuine Carbon Fiber

Say goodbye to cheap ABS plastic and printed vinyl. Crafted from real carbon fiber featuring a flawless 2x2 twill weave, delivering an ultra-lightweight profile and a deep, multi-dimensional texture.

🛡️ Triple-Layer UV Protection

Finished with three coats of premium UV-resistant clear coat. Designed to withstand harsh sunlight, ensuring your exterior mod maintains its pristine look without rapid fading or severe yellowing over time.

🎯 Precision OEM+ Fitment

Molded directly from factory 3D data. This ensures a seamless, flush fit against your original fog light housing. It looks like a factory-installed performance package, not an aftermarket afterthought.

⏱️ 5-Minute Non-Destructive Mod

No drilling, cutting, or bumper removal required. Applies easily using the pre-installed automotive-grade 3M adhesive. Completely reversible, making it a safe choice for leased vehicles.

Product Specifications
Material Genuine Carbon Fiber (Dry / Wet process)
Available Finishes Glossy / Matte / Forged Carbon
Fitment Tesla Model 3 2017-2023 (All trims & versions)
*Does NOT fit 2024+ Highland
In the Box 2x Carbon Fiber Fog Light Trims, 1x Roll of 3M Tape
Installation Guide

Achieve a professional result in your own garage by following these simple steps:

  • Prep the Surface: Thoroughly clean the fog light area. Remove any dirt, oil, wax, or ceramic coatings using rubbing alcohol. The surface must be 100% dry.
  • Test Fit: Before removing the tape liner, place the trim over the fog light to verify the exact alignment and position.
  • Heat the Tape (Crucial): For maximum adhesion, use a heat gun or hair dryer to gently warm the 3M tape (do not exceed 104°F / 40°C) right before applying.
  • Apply & Press: Avoid touching the adhesive. Align carefully, press firmly into place for 20-30 seconds. Do not wash your car or expose it to rain for 48 hours.

Note: Items are considered used and non-returnable once the adhesive liner is removed. Please test fit first!

Warranty & Care Information
  • Carbon Pattern: Real molded carbon fiber is hand-laid. Minor variations in the weave direction are normal characteristics of authentic composite materials and are not manufacturer defects.
  • 1-Year UV Warranty: While coated with 3 layers of UV protection, extended exposure to direct, intense sunlight without proper maintenance can degrade any clear coat. Slight yellowing over years of outdoor parking is normal. We highly recommend regularly applying a high-quality UV protectant spray (like 303 Protectant) or a nano-ceramic coating to maximize lifespan.
Frequently Asked Questions (FAQ)

Q: What is the difference between Dry Carbon and Wet Carbon?

Dry Carbon (Pre-preg) is manufactured using carbon cloth pre-impregnated with resin, then cured in an autoclave under high vacuum pressure. This results in an ultra-lightweight, razor-thin piece with a flawless weave—ideal for overlays to ensure a flush fit.

Wet Carbon involves hand-laying the cloth and manually applying liquid resin. It is slightly thicker and heavier, often providing a deep, glossy finish at a more accessible price point. Both are 100% genuine carbon fiber.

Q: Does this fit the 2024 Model 3 (Highland)?

No. This product is exclusively designed for the 2017-2023 Tesla Model 3. The 2024+ Highland refresh features a completely redesigned front bumper without these traditional fog light bezels.

Q: Will these overlays block my sensors or affect Autopilot?

Not at all. Our fog light trims are ultra-thin and precision-cut to completely avoid covering or interfering with any OEM ultrasonic sensors (USS) or cameras. Your Autopilot and parking features will function perfectly.

Q: Is this real carbon fiber or just cheap printed ABS plastic?

These are made of 100% genuine molded carbon fiber featuring a real 2x2 twill weave pattern. They are NOT cheap ABS plastic or water-transferred faux carbon.

Q: How do I ensure the tape doesn't peel off (especially with Ceramic Coating)?

For a permanent bond, the surface must be absolutely clean. If your car has a ceramic coating or wax, you must wipe the installation area with rubbing alcohol first. Crucial step: Gently heat the pre-applied 3M tape with a hair dryer immediately before pressing it onto the bumper.

Q: Are these safe to run through an automatic car wash?

Yes! Once properly installed and allowed to cure for 48 hours in dry conditions, the automotive-grade 3M adhesive creates a permanent bond that easily withstands both touchless and traditional automatic car washes.

Free Global Shipping
Perfect Fitment Guarantee
30-Day Hassle-Free Returns
Read More
Read Less

All products are shipped out from one of the Signature Autohaus shipping locations. Signature Autohaus drop ships some products and ships direct others. All products are shipped via FedEx, UPS, DHL or another qualified shipping carrier. Special arrangements may need to be made for international orders and oversize packages. In the event a product arrives damaged to your location, please follow the steps listed below. All damaged items must be reported to the shipping carrier immediately and you must notify Signature Autohaus within 5 days of receiving your order. If these steps are not followed, your shipment may not be able to be a candidate for a claim. Complete the Shipping DAMAGE Claim Form by contacting the carrier that delivered your package. 1) Keep the product and its original packaging and box Make a list of the damaged or lost item(s) 2) Signature Autohaus will contact the shipper once we receive the email info above to schedule a pickup, DO NOT send it back to us 3) Once the product is picked up and inspected by Signature Autohaus and or Supplier, a replacement or credit will be issued. 4) The Shipping Rates shown at time of checkout our dimensional rate only. If your shipment weight is to much then contact us for a shipping quote. If there is an error in the shipping rate quoted we will contact you and let you know of the changes. International orders(Outside the USA) are not automatically processed as we may require additional information from you. If a product is ordered and not wanted, the UNUSED item can be returned for a 35% restocking fee. Shipping is not refundable in either direction. All items wanting to be return MUST be reported within 30 days of the original invoice date. No items will be returnable after 30 days. All products shipped from the Signature Autohaus warehouse are shipped via FedEx or Freight and require a signature when delivered. Some packages shipped from the manufacturer may or may not require signatures for package release. Fedex, UPS, and DHL have package pick up locations if you are unable to sign for the package. If the package is returned to Signature Autohaus or manufacturer, you will be responsible for the return shipping costs and pay a 35% restocking fee. These fees will be charged to your account on file. SIGNATURE AUTOHAUS DOES NOT REFUND SHIPPING CHARGES. If you modify, install, or alter the item in any form, we cannot accept it as a return, will not cover any expenses related to the product or installation, and you maybe be required to purchase a replacement. In the event that the product you ordered is sent either incorrectly or processed wrong by Signature Autohaus, we will arrange for the package to come back to us and ship out a replacement. We will evaluate the situation before we determine the shipment was incorrect. To return a item back to us, please do the following: 1. Contact our Customer Service Department to receive a RMA number. All packages returned without a Returned Merchandise Authorization number will be refused. 2. Package the item up in original packaging unless deemed unuseable 3. Include the UNUSED parts and any additional information that was included 4. Include a copy of your receipt 5. Write a brief description of the problem with the product 6. If you have a receipt for the return shipping include as well 7. We DO NOT accept any freight collect packages 8. Once we have received the above information we will notify you via email or phone and let you know the status.

We use cookies to improve your experience on our website. Read about how we use cookies in our Privacy Policy. By browsing this website, you agree to our use of cookies. privacy policy
accept

Your cart

×