*Due to high demand, please allow 2-4 weeks for orders to be shipped.
The ultimate Off-road protection for your Rivian R1S and R1T is here. Designed and manufactured in the USA, the Direct Current Engineering Rock Sliders can be used as a running board also known as side steps. Still, it is engineered to go beyond those limits to trek the rough terrains of your off-road adventure. Our Rock Sliders / running boards are the missing link in ease of access to your Rivian at any ride height setting while protecting your vehicle when going off-road.
Torque Specs
| Bolt Type |
Torque (FT-LB) |
| TP55 |
95 |
| Hex Bolts |
55 |
Maximum Strength
All seams between tubes and brackets are fully welded for maximum strength and durability. This makes the entire step (aside from the plates that bolt to the top) one single piece even further increasing its strength by avoiding bolted connections between separate parts. The sliders for the R1T come in at 62 lbs per side, and the R1S weight comes in at 54 lbs per side. These have no negative effects on the Rivian's range!
Quality Finish
The main structure of the rock sliders has a high-quality textured black powder coat. While the top faces of the steps will have an equally high-quality non-slip textured black finish.
No compromise on Ground Clearance
Our rock sliders will not affect the current ground clearance of either the R1S or the R1T at any ride height. They sit completely flush against the underside of the vehicle.
Dual Mounting Points
Our Rock Sliders are capable of using the factory Rivian mounting points, or simply use our frame to support the vehicle on a lift. The R1S sliders have provisions in the front that allow the use of the OEM jack points. While the rears are covered, the sliders include built-in provisions for the jack points. While on the R1T, the sliders enable the use of all factory mounting points.
Key Features
-
Designed and manufactured in the USA with the highest quality material
- Uses DOM tubing
-
R1T Rock Sliders are 62lbs each
-
R1S Rock Sliders are 54lbs each
-
Allows for ease of access into the vehicle at any ride height
-
Does not compromise ground clearance at any ride height
-
Easy to install
-
No custom work or cutting is required for installation
-
Integrated steel pads for conventional jack use
-
High-quality textured black powder coat
Easy to Install
The rock sliders are a fully bolt-on solution that requires no vehicle modification. Customers will only have to remove the plastic panel on the underside of the truck to bolt the rock sliders on. Both rock slider sets will reuse the OEM hardware found on the underside of the truck. R1T owners will be given a few extra bolts that are required to attach the rock slider brackets to threaded holes found on the underside of the truck that do not already have bolts from the factory.
R1T Install Video
R1S Install Video
Vehicle fitment
- 2021-2024 Rivian R1T Gen 1
- 2025 Rivian R1T Gen 2
Weistec part number: 01-111-02437-0
All products are shipped out from one of the Signature Autohaus shipping locations. Signature Autohaus drop ships some products and ships direct others. All products are shipped via FedEx, UPS, DHL or another qualified shipping carrier.
Special arrangements may need to be made for international orders and oversize packages.
In the event a product arrives damaged to your location, please follow the steps listed below. All damaged items must be reported to the shipping carrier immediately and you must notify Signature Autohaus within 5 days of receiving your order. If these steps are not followed, your shipment may not be able to be a candidate for a claim.
Complete the Shipping DAMAGE Claim Form by contacting the carrier that delivered your package.
1) Keep the product and its original packaging and box
Make a list of the damaged or lost item(s)
2) Signature Autohaus will contact the shipper once we receive the email info above to schedule a pickup, DO NOT send it back to us
3) Once the product is picked up and inspected by Signature Autohaus and or Supplier, a replacement or credit will be issued.
4) The Shipping Rates shown at time of checkout our dimensional rate only. If your shipment weight is to much then contact us for a shipping quote. If there is an error in the shipping rate quoted we will contact you and let you know of the changes. International orders(Outside the USA) are not automatically processed as we may require additional information from you.
If a product is ordered and not wanted, the UNUSED item can be returned for a 35% restocking fee. Shipping is not refundable in either direction. All items wanting to be return MUST be reported within 30 days of the original invoice date. No items will be returnable after 30 days. All products shipped from the Signature Autohaus warehouse are shipped via FedEx or Freight and require a signature when delivered. Some packages shipped from the manufacturer may or may not require signatures for package release. Fedex, UPS, and DHL have package pick up locations if you are unable to sign for the package. If the package is returned to Signature Autohaus or manufacturer, you will be responsible for the return shipping costs and pay a 35% restocking fee. These fees will be charged to your account on file.
SIGNATURE AUTOHAUS DOES NOT REFUND SHIPPING CHARGES. If you modify, install, or alter the item in any form, we cannot accept it as a return, will not cover any expenses related to the product or installation, and you maybe be required to purchase a replacement.
In the event that the product you ordered is sent either incorrectly or processed wrong by Signature Autohaus, we will arrange for the package to come back to us and ship out a replacement. We will evaluate the situation before we determine the shipment was incorrect.
To return a item back to us, please do the following:
1. Contact our Customer Service Department to receive a RMA number. All packages returned without a Returned Merchandise Authorization number will be refused.
2. Package the item up in original packaging unless deemed unuseable
3. Include the UNUSED parts and any additional information that was included
4. Include a copy of your receipt
5. Write a brief description of the problem with the product
6. If you have a receipt for the return shipping include as well
7. We DO NOT accept any freight collect packages
8. Once we have received the above information we will notify you via email or phone and let you know the status.